- +49 30 400 37846
-
English
Key Benefits
Some of the key benefits you can expect when using AMACUT are:
- Lowest consumption
- Highest productivity, lowest cost
- Consistent abrasive performance
- Reduced dust and waste disposal
- Local technical support
The Ervin technology for high carbon steel abrasives is the most advanced in the world. Our unique Ervin production process in Glaubitz, Germany, ensures AMACUT is a consistently high quality martensitic abrasive grit.
Continuous quality control and production in a controlled atmosphere guarantees consistently high performance.
After-Sales Support
Steel abrasive is not a commodity. It is an essential component in a process that can be very costly if not maintained and supported on a regular basis.
Our trained technical support personnel are therefore at your disposal, at no additional cost. We can arrange to visit relevant plants as required on a regular basis to provide:
- Advice on abrasive selection
- A review of machine settings to ensure reduced wear and optimum abrasive consumption per m²
- Advice on potential cost savings and productivity increases
Specifications AMACUT
Chemical Analysis
| C | 0.80 - 1.20% | |
|---|---|---|
| Mn | 0.80 - 1.20% | |
| Si | 0.40% - MIN | |
| S | 0.05% - MAX | |
| P | 0.05% - MAX | |
Hardness
| Grit | ≥ 60 HRC (700 HV) |
|---|
Microstructure
| Uniform tempered martensite |
Density
| ≥ 7.3 g/cm³ |
| AMACUT | mm | 2.000 | 1.700 | 1.400 | 1.180 | 1.000 | 0.850 | 0.710 | 0.600 | 0.500 | 0.425 | 0.355 | 0.300 | 0.180 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SAE | 10 | 12 | 14 | 16 | 18 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 80 | |
| +80 | AP | 75% MIN |
90% MIN |
|||||||||||
| +70 | AP | 75% MIN |
90% MIN |
|||||||||||
| +60 | AP | 80% MIN |
90% MIN |
|||||||||||
| +50 | AP | 80% MIN |
90% MIN |
Special sizes are available upon request.
Specifications
Physical properties conform to SAE J1993
AP = All Pass
MIN = Minimum
MAX = Maximum
Let’s Talk
Our sales office can guide you through the quotation process. Please call +49 30 400 37846, visit the contact page or complete the form below.
What is abrasive grit?
An essential part in dealing with any hard-wearing materials, abrasive grit can help provide an efficient cutting solution when you are working with a range of resilient natural materials.
This high degree of flexibility allows abrasive grit to be used with a gang saw to help with reshaping stone materials. When deployed in a controlled atmosphere, the material can provide a highly efficient cutting solution for a range of professional sectors – giving you a wide range of options when it comes to quickly and effectively shaping or reshaping stone exactly as you need.
Who would need abrasive grit?
Any professional environment that requires the deployment of a gang saw can make use of abrasive grit cutting solutions. This is perfect for the construction sector, or clients that work extensively with masonry and are looking for a high-utility, low cost solution to more expensive cutting tools.
This allows for the quick creation of highly regimented stone slabs; ensuring uniformity and a degree of controls that standard cutting tools simply cannot match. Whether you are leasing, deploying in-house tools, or searching for a solution – deploying abrasive grit allows you to get the results you need when it truly matters most.
What are the benefits of using an abrasive grit?
Our AMACUT product is perfect for a range of natural stone cutting tasks. Some key additional advantages include-
Savings: When stacked up against other abrasive options in the market, AMACUT provides significant cost savings. This allows you to get more out of less when it comes to using the material and achieves the high grade results you need.
Consistency: AMACUT is produced to the highest professional standards. This guarantees a high degree of reliability when it comes to how it is deployed and ensures that variations in the material used will never cause complications.
Safety: Given the high granular thickness of AMACUT, this makes it safer to deploy with your teams. This in turn massively reduces the degree of clean-up required, allowing your workspace to stay safe and secure.
In addition, our team will always work with any client to ensure that your cutting solution is deployed exactly as needed. If you want to learn more about AMACUT, you can review our stone cutting case study in full here.
Get in touch
At Ervin, we understand the importance working with businesses to find the right solution for your unique use-case. If you want to learn more about our AMACUT line or find a product that is right for your team, take a moment to review our comprehensive solutions finder to ensure you are fully aware of the options available.
Our range of bespoke abrasives are developed to the highest possible standards – ensuring an unmatched level of reliable quality that will give you peace of mind when conducting your cutting work. If you need additional guidance or have any questions or queries, please contact us directly and let our team know exactly what you need to deploy a solution that is right for you.
